Product Feature:
This 20W/30W fiber laser marking machine plays an important role in the electronics industry, which can be widely used to deposit a thin film of a chemical on a substrate material to create a narrow trench in the semiconductor substrate.
It offers excellent laser beam quality with the newest technology and adopts the high-quality fiber laser generator high-speed galvo system to enable stable laser output and high-quality laser mode.
Product Description:
This 20W/30W fiber laser marking machine is equipped with higher energy density, which is a concentrated energy flow that illuminates the surface of the material being processed. Also, the surface of the material absorbing laser energy creates a thermal excitation process in the illuminated area, thereby causing the surface of the material rises in temperature and realizing the function of causing metamorphosis, melting, ablation, evaporation and so on. Compared with the ordinary machine on the market, our 20W fiber laser marking machine with very high load energy can break the chemical bonds in materials, especially for organic materials, which can cause non-thermal process damage. This cold working has special significance in laser marking processing because it is not only thermal ablation, but does not cause thermal damage side effects, and the cold peeling of the chemical bond is broken, so that the inner layer and the vicinity of the surface to be processed are not Produces heat or thermal deformation.
| The main power of laser | 20W/30W |
Wavelength | 1064nm |
Stability (more than 24 hours) | ＜2% |
Laser source | Raycus/JPT |
Marking range | 110*110mm-300*300mm |
Marking speed | 7000mm/s |
Min resolution | 0.012mrad |
Repetition accuracy | 0.002mm |
Voltage | Single-phase: 220VAC/110AC, 50/60Hz |
Cooling way | Air cooling |
Working temperature | -10-50℃ |
Working humidity | 5%-75%, free of condensed water |
Working condition | Clean and dust-free or dustless |
Minimum line width | 0.01mm |
Minimum character | 0.1mm |
Supporting graphic format | BMP, JPG,GIF, TGA,PNG, TIF, AI, DXF, DST, PLT, etc. |
Control software | Leize V1.1/Ezcad |
Moving range of marking head | 50cm as usual |
Feature
1. Fiber Laser Source
The fiber laser uses a double-clad erbium-doped fiber. This fiber has a wide absorption and emission area, a high quantum conversion rate, and a fiber laser with a gain medium that have high power output and high beam quality. The perfect laser beam and long lifetime 100,000 hours
2. Digital Galvanometer Scanner System
@Long-term stable operation@strong anti-interference@high linearity@small temperature drift@high precision@ fast marking
3.Lens
The fiber laser lens is a double-sided lens, AR coating, good anti-reflectivity.
4. Control Switch
Including emergency stop, key switch, power switch, etc, convenient to identify, easy to operate.
5. Lifting System
the handwheel, laser focus distance can be adjusted easily. The operation is simple and convenient.
6. Red Light Pinter
Red Light Pointer showing the parking area before laser marking
7. Laser Marking Software
@the interface is simple, easy to understand, easy to use
@support for automatic power-off
@support for importing the required text, fonts, databases, vector graphics, pictures, etc. from the U disk can also be exported to the U disk.
@ support customer customization required features.
8.power supply
Output voltage stability can be controlled within ±0.1V. Line part to achieve hierarchical control, increase the time relay to achieve step-by-step power supply galvanometer board, to avoid current supply caused by current fluctuations, impact on the board.
samples
