It can process a variety of metal and non-metal materials, such as marking high hardness, high melting point, and brittle materials.
Our desktop fiber laser marking machine belongs to non-contact processing, and we do promise that there is no damage to the product.
The laser beam is thin, the processing material consumption is small, and the processing heat affected zone is small.
This desktop fiber laser marking machine features a rare-earth-doped glass fiber as a gain medium, and the fiber laser can be developed based on a fiber amplifier. Under the action of pump light, a high power density is easily formed in the fiber, resulting in a laser of the laser working substance. The energy level of particle number inversion can form a laser oscillation output when a positive feedback loop is properly added. Compared with an ordinary machine on the market, our desktop fiber laser marking machine features laser beams to mark permanent surfaces on a variety of different materials. The effect of marking is to expose the deep material by the evaporation of the surface material and burn some of the material by light energy to reveal the desired etching pattern. Due to the high performance, our machine has outstanding performance in energy saving and environmental protection.
Desktop Fiber Laser Marking Machine Technical Parameters
Laser beam quality(M2)
Stability(more than 24 hours)
Pulse width (ns)
Pulse Energy (MJ)
Marking speed (mm/s)
Locating speed (mm/s)
Min resolution (mrad)
Total power (w)
Environment temperature (℃)
Length of fiber (m)
Measurement: W*H*D (mm)
610*760*1500 (variety kinds can be chosen)
The total weight (kg)
Raycus Laser Source
Miniaturization, Intensification, High Brightness, High Conversion Efficiency, High Energy Output, High Beam Quality, No Optical Collimation, No Mechanical Stability, Power Saving Without Maintenance，Hertz frequency from 1 to 200 is adjustable, marking accuracy is finer.
The products developed by the company have broken the long-term monopoly position of Europe and the United States in this field, and have become a domestic product that can replace the high-end intelligent fiber lasers in Europe and America.
The long-term operation is stable and reliable, with strong anti-interference and small temperature drift. The 16-bit DAC with high precision and high performance are used to improve the closed-loop algorithm and powerful motor drive technology on the control. The precision is high and the marking speed is fast.
Special optical materials, high surface finish of the lens, accurate optical film, high laser damage threshold. The coating of the lens is a dielectric film and is a highly reflective film. The reflectivity of the lens is between 99.5% and 99.9% with almost no loss.
With in-line connection technology, it is easy to connect wires with a diameter of 0.25 mm2 or more without tools. With special contact springs, the wires can be easily inserted and the connection quality is high.
New design equipment cabinet:
Durable and durable, the tabletop is marble and the potting material is sealed to protect the cabinet from moisture. The height of the table is ergonomically designed.
Power Supply：Mean Well
Output voltage stability can be controlled within ±0.1V.
The line part realizes the grading control, and the time delay is added to realize the stepwise power supply of the galvanometer board, avoiding the current fluctuation caused by the simultaneous power supply, and causing an impact on the board.
The double red light focusing system
Fast and accurate focusing