Home > PRODUCT >> Laser Marking Machine >> CO2 Laser Marking Machine

Laser Marking Machine HS Code

Chat Now

Product Details

Product Introduction

1. Control Panel

Laser Marking Machine HS Code uses a genuine EZCAD /LEIZEV1.1 control board and software. The software has built-in dongle and rotation functions. Of course, it can also develop flight marking function, suitable for production lines.

The software supports Win.7, Win10 32-bit and 64-bit, and can be updated. Some vendors will use the copied EZCAD software as their promotional method. The copy software only supports Win7 32-bit without updating.

2. Red light indicator

Laser Marking Machine HS Code has two types of red lights: internal red lights and external red lights. Inside the red light, we need to adjust it so that it is completely covered by the laser beam. So that we can find the precise marking position from the red light pointer.

The external red light is used to adjust the focus. Before marking, we need to find the most suitable focal length. We are used to measuring the vertical distance from the lens and the workpiece with a ruler to confirm the best marking position. But this is a bit complicated and difficult to operate. Then XT LASER issued an external red light. By fully covering the two red lights, we can easily find the best focal length.


Parameter

Laser type

CO2 laser

Laser power

40W/50W/60W

Pulse frequency

<60KHz

Marking area

50×50/100×100/175×175/300×300/(mm)

Min line width

±0.05mm

Min character

≥0.2mm

Marking speed

≤7000mm/s

Repeating precision

±0.01mm

Power supply

220V/110V/50KHz/15A

Gross power

<2.5KW

Operating temperature

0℃-45℃

Cooling mode

Air cooling





Feedback